When you get your first look at Picasso Nano Amplifiers you will realize that size really does not matter too much at all. That is, just the size of the equipment, however, the size of the sound of the stream is what matters with Picasso Nano. It is so amazing and quite unbelievable that such a small piece of music amplifying equipment is capable of such an amazing output. What’s more, is in addition to fitting your bill ideally, it snugly fits into the biggest or smallest of cars, and the presence is known only when the music blasts non-stop unless your neighbor or co-traveler is complaining about the high decibels bombarding his or her ears. 

You can install the amplifier under the front seat, or the back seat and you’ll still have enough space between the seat and the amplifier for ventilation. What’s more, is the amplifier does not get heated up after a half-hour of continuous music playing at high volume. Thanks to the full range crossovers the amplifier is equipped with, you sense no sound distortion even when the volume is turned up to the maximum. Other sport compact amplifiers use bizarre technologies with pseudo power supplies. Picasso Nanos use tried and tested MOSFET power supplies & tenacious Class D circuitry.

Using an Original or Factory Radio? No Problem, this amplifier is equipped with an Automatic Hi-Level Signal Sensing Turn-On. No need to run a remote wire turn on, this amplifier will detect the signal and turn on and off automatically. (Hi-Level Input only)

• Max Power 1,280 Watts
• RMS Power @ 4Ω 60W x 4 + 200W
• RMS Power @ 2Ω 80W x 4 + 350W
• RMS Bridged @ 4Ω 160W x 2 + 350W (2Ω)
• Remote Gain Control Included
• Low Pass Filter 35Hz – 250Hz (Ch 5)
• High Pass Filter 35Hz~250Hz
• Bass Boost 0-12dB (Ch 5)
• Bass Boost Frequency 45Hz (Ch 5)
• Subsonic Filter –
• Frequency Response 10Khz-35Khz
• S/N 104dB
• Input Sensitivity 200Mv-6V
• THD <0.05%
• Operation Voltage 9V-16V DC
• Fuse Rating 40A
• Dimensions
• (8.25″W x 2.75″H) 10.25″ L