| | |
|
| |
| | |
|
If you have problems ordering,
call in and we can take your order.
Call or Email for the Best Deals!
APO/FPO/International Orders OK
 
|
|
CDT ST-100SP SonaTheater ST-100 Active Subwoofer w/(5) front-rear-center Sonapods
|
ST-100SP
|
Retail Price: $799.99
Thunder AV Price: $664.95
You Save: $135.04 (17 %)
* Whole number only
Detailed Description
Sonawall SonaPod Mid/Tweeter
Tiny enough to hide in the corners of any room or cabinetry yet robust enough to fill your listening spaces with a perfect blend of direct and reflected sound, the versatile Sonapod and Sonacenter are easy to integrate in a variety of configurations for pure audio or audio-visual installations. Groundbreaking engineering enables the Sonapod and Sonacenter to take maximum advantage of a rooms geometry to perform like a system many times larger. Clean, crisp sound delivery is the hallmark of these speakers making them a key element in building the Sonawall soundstage.
Specifications
Impedance 6 Ohms
Power Handling 200 Watts
Frequency Reslponse 30 - 20 KHz
Dimensions 2.5" x 2.5" x 3"
Sonawall ST-100 Subwoofer
SonaTheater ST-100 is a unique in design active subwoofer. The engineering goal was to create the smallest possible active subwoofer unit in size with bass performance to compete with the largest subwoofers in the market place.
ST-100 marvel has the fastest, tightest and deepest bass response in the market place in a small package never seen and heard of before.
SonaTheater ST-100 Active Subwoofer Contents:
100watt RMS amplifier
6.8 high-power long excursion subwoofer.
Frequency response: 30Hz-250Hz
Subwoofer driver firing downward.
Low-Level Inputs: Line level RCA inputs to connect to the pre-amp or line level out puts of the full range amplifier to the inputs of the subwoofer amplifier. The inputs arr internally summed to mono.
Low-Level Outputs: Line level that provide a line level full range output for the connection of additional equipment. This out put is only available when a signal is present at the Low Level RCA outputs Input.
Speaker High-Level Inputs: Used to connect from the speaker out puts of the full range amplifier or home theater receiver to the subwoofer amplifier with speaker wire. A mono signal iis derived from the stereo speaker level source which then feeds the subwoofer amplifier input.
Speaker High- Level Outputs: Used to connect from the subwoofer amp to pass signal from the full range amp on to the main L/R speakers. Signal is only present on his output if the high-level input is also used. The signal to the L/R speakers will be shaped by an internal 125Hz high-pass crossover.
Gain: Adjust the output level of the subwoofer amplifier.
Frequency: Used to determine the frequency of the internal variable electronic crossover. Adjustable from 30Hz to 180Hz and has a slope of 12dB. Per octave.
Power switch: On. Off, and Auto mode. When the Auto on position is selected, the amp is in a standby mode until an input signal is detected. The amp will go back to standby mode some minutes after the input stops. In Auto mode, the Power LED will remain illuminated, even when the amplifier is standing by.
Built-in comprehensive internal protection against shorted speaker loads, thermal faults, and overload conditions.
Phase Switch: On, Off, and Auto mode. When the Auto on position is selected, the amp is in a standby mode until an input signal is deteced. The amp will go back to standby mode some minutes after the input stops . In Auto mode, the Power LED will remain illuminated, even when the amplifier is standing by.
Dimensions: 17HX10D X 81/4 W
Group Shot
Configure your own System
Product Reviews
|
|
|