Q10B Specifications

• Sub harmonics On Steroids - The Q10B is an awe-inspiring sub harmonics unit designed for special effects enhancement. You can now add super powerful, low frequency effects without using costly hydraulics or bulky subwoofers.
• Control sound pressure levels throughout your home, car, attraction or venue by effectively isolating the low end to your seats and flooring. The Q10B virtually eliminates low end "resonating" into adjoining areas. Designed for superior music quality, the Q10B answers the need for both accurate low frequency response and maximum tactile effect. Music has never been more powerful and effective.
• Insane Power - One Q10B can easily replace 3, 4, or even 5 commonly sold shakers and move 2 or 3 theater seats or a sizeable platform.
• More Accurate - Designed by world-renowned engineer Joseph Sahyoun and team; the Q10B is musically perfect, with a tight and distinctive transient response.
• Smaller - At only 3 9/16" tall and 6 3/16" wide, the Q10B can satisfy more space limitations than any other transducer on the market.
• Almost Indestructible and Maintenance Free - With only one moving part and a cast aluminum heat sink for heat dissipation and protection, the Q10B is the only shaker you'll ever need to buy.
• More Bass Less Bucks - The Q10B's unmatched combination of power, reliability and affordability make it the most comprehensive solution for your special effect needs.
• Universal mounts
• Platform mounting
• 2x4 mounting
• Chair mounting
• Less than 7" long & 4" tall
• Flat wire aluminum voice coil
• Thermal protection
• Rugged cast aluminum heat sink
• 2" excursion @ 22Hz
• Enhanced LFE
• 5 - 40Hz frequency response
• 8W impedance
• 40-1000 Watts
• Dimensions:
• H = 3 9/16" 90.4875mm
• W = 6 3/16" 157.1625mm
• D = 3 9/16" 90.4875m
• XJ-1000 Specifications
• Contractors, Custom Installers & Retailers
• Home Theater
• Multi-channel Sound Systems
• Marine and RV Compatible
• Subwoofer Compatible
• The XJ-1000FR employs a PWM power supply that delivers the DC power at 99.5% whopping high efficiency.
• The DC is needed to feed the output amplifier with the necessary volt current. The power supply uses more
• than 6 layers of copper clad PCB to control and ground high frequency radiations. The output also employed its
• own PWM to deliver clean accurate sound that rivals class “A/B” amplifiers.
• The input audio stage employs a digital signal processor to shape and control the pre-amp signal without
• compromising signal to noise ration or separation. The DSP also employs the famous DRCDC (Dynamic Rail
• Control Drive Circuitry) that prepares the DC power that is just over the need of the amplifier based on the audio
• signal while maintaining low THD and noise.
• - Digital Signal Processing
• - Left / Right RCA Inputs
• - Left / Right XLR Balanced Inputs
• - Stereo / Bridged Switch
• - External Trigger Input
• - USB Port
• - Left / Right RCA Output
• - MAC & PC compatible
• - 99.5% Efficiency
• - DRCDC (Dynamic Rail Control Drive Circuitry)
• Power Handling
• 1 x 1000 WRMS (4-Ohms Mono)
• 1 x 600 WRMS (8-Ohms Mono)
• 2 x 500 WRMS (2-Ohms stereo)
• 2 x 300 WRMS (4-Ohms stereo)
• 2 x 150 WRMS (8-ohms stereo)
• Frequency Response 10Hz-24kHz
• Total Harmonic Distortion <0.02%
• Finish Black
• Height w/out feet 1-3/4” (44 mm) 1-7/8” (46mm)
• (W) Width 19” (483 mm) 1” (25mm)
• (D) Depth w/ knobs 14-1/2” (367 mm) 7/8” (22mm)